42 putz stroke problem
super pumper 09-25-2014
comment profile send pm notify

Hey i got a 99 42m putz 16c it wont stroke off the remote or off the back panel i replaced the boost pump in front of the main hydraulic pump it will kinda creep abit but barely moves.Any other ideas? i was told it could be the 900 valve but havent tried that yet is there even a way to check to see if it is that?The light on back panel is also lighting up when trying to stroke


rusty22 09-25-2014
reply profile send pm notify

Does it work in manual? 

 


super pumper 09-25-2014
reply profile send pm notify

like you mean by trying to stroke off back panel?no it doesnt


Concrete7111 09-25-2014
reply profile send pm notify

Will it stroke manually off the hydraulic block?


super pumper 09-25-2014
reply profile send pm notify

no i havent is that where you hook up  wires on the block to switch it manually with toggle switches ive never had to do that so im not a 100 percent sure


rusty22 09-26-2014
reply profile send pm notify

Read operation manual on how to work it in manual. My wild guess would be the relay. I call it a centipede plug. 1/2 inch high 1/2 inch wide inch or more long. Has 8 or ten post on it.If it's loose or bad it won't stroke


Beast 09-27-2014
reply profile send pm notify

does the pistons move but the s tube doesn't shift ? if so check hopper safety switch , that little centipede relay , proximity switches , there is some manual buttons you can push on the control block that shifts it manually,


rusty22 09-27-2014
reply profile send pm notify

You posted same problem in 9/2012 TravelTec gave you a photo of the manual valves.Doesn't get any better than that. Look at your reply's