another can of worms
boony 05-09-2010
comment profile send pm notify

am i wrong in saying that puting tip section of boom in forbidden position(past 90 degrees) poses the same danger as shortlegging.if so why do scwhing just rely on operator simply not to put it in such a position rather then employing a failsafe mechanism as they have with EASy for shortlegging.

WAZZA 05-10-2010
reply profile send pm notify

do you ever get a good anwser from this site boony or just a load of crap all i know is if you dont feel safe dont do it

PUMBO 05-10-2010
reply profile send pm notify

I suspect, reason why this is forbidden, is because the stress caused by the last stage on the first stage hydraulic cylinder is enough to run the risk of stripping the threads of the end cap which will cause the rod to pop out off the 1st stage hydraulic cylinder, which would cause boom to topple backwards.

52putz 05-10-2010
reply profile send pm notify

I agree with wazza; next thing ya know, there will be training wheels on the remote!

If they say it is unsafe, use your ef'in head and don't do it.  How about you rely on YOUR brain instead of some computer. 

That's why everyone likes to drive old cars and trucks, they get in and there is no buzzer or warning lights telling you what your doing wrong. 


Trey 05-10-2010
reply profile send pm notify

That make no sense at all. What are you saying, that you can't pump with the tip straight out?? If so, you are wrong, yo can pump it in any configuration you want to. They make the tip go 230 or some odd degrees for a reason. I pump straight out all the time when I pump, and the Charts don't say anything about keeping the tip under 90 degrees.

Mudslinger 05-10-2010
reply profile send pm notify

Trey...Its better to keep your mouth shut and be thought a fool,than to open it and remove all doubt!!! They're talking about opening it over high centerline. PUMPBO is right. The rams and their mounting points are designed for the stresses of pushing the scissors. Not trying to pull it over centerline. Now slow down,kid or you'll tip that truck over! And tell Paul I said Hi!

Trey 05-10-2010
reply profile send pm notify

You big boom guys are on a whole different level Haha, I'll say HI

boony 05-11-2010
reply profile send pm notify

look clowns wasn't asking if you could do it or not just why is there safety mechanism for one prohibited boom position(ie. boom slew over non extended outriggers) and not another(ie boom tip folded back past 90 verticle).by the way not everyone aware of prohibited boom tip zone so i think was worthwhile subject and you small boom operators read ya manuel most booms have this restiction

WAZZA 05-11-2010
reply profile send pm notify

stick it too em Boony you of all people know your stuff and i have allway tried to learn from you ps love the clown remark thats gold

special little guy 1 05-12-2010
reply profile send pm notify

wazza at the top of the page you bag the bloke out then the bottom of the page you suck up his ass what di you find out hes your boss after the first message and then realise if you wanna go any where you better pick your words more carefully... grow some nuts 

WAZZA 05-12-2010
reply profile send pm notify

to special little guy mate learn to read i asked a simple question and then you tell me to grow a set, thats not right ps im not the one hiding behind a nick name that nobody knows. wheres your profile pic or info all left blank?

Pump N00b 05-12-2010
reply profile send pm notify

Varies from machine to machine, so read the specs on what you are running.
I've ran mostly Putz and on some you can extend the last sections over centre as long as the hose is on the right side, even when shortrigged with OSS,
and on some you can't, and on some you can 'flip the boom' and run it backwards, IE. indoors, low height.
So read the specs and ask the manufacturer if in doubt.

PhilB01 05-12-2010
reply profile send pm notify

Wazza, if your so smart why is your profile pic upside down?

boony 05-13-2010
reply profile send pm notify

thanks 4 havn me back SLG 1 but i'm big enough to fight my own battle and by the sound of your screen name you couldn't fight ya way out of a wet paper bag.

special little guy 1 05-13-2010
reply profile send pm notify

boony by the sound of your last blog your whole company hates you. you should take all the help you can get.

wazza the only thing simple appears to be you cos you cant remember who your mates are. p.s i dont no if id be trying to learn to much off your idol boony he sounds pretty wild and the last thing we need in this industry is yet another idiot operator good luck buddy stick with a line pump and well all be better of.


boony 05-15-2010
reply profile send pm notify

you really r special is all i can say

pumpjockey 05-15-2010
reply profile send pm notify

A pictures worth a thousand words. It's in black and white too, break out your crayons, guys!!