concords
ShortStik 10-26-2008
comment profile send pm notify

a boom aint doin this if it aint smooth (without damage)

kudos to concord.  they have a great product.

 

 

 

 
Tiago40m 10-26-2008
reply profile send pm notify

WOW its all i have to say

Now that is a cool set up.

Great job with that concord


Bob 10-26-2008
reply profile send pm notify

If everything was adjusted to perfection

the boom would never come off the rest

without the operator.

Don't sell yourself short

Great set-up ;~)
kneerick 10-26-2008
reply profile send pm notify

tight squeeze
Leroy 10-26-2008
reply profile send pm notify

SWEEET!!!  I'm sure you got a plan of attack for the ground slab after squeez'n in there.

That job's a perfect example that even a 32 requires an oiler now & then!!
Seed 10-26-2008
reply profile send pm notify

WOW! That is something to look at! I have to say, ASTRA must have the best looking pumps on the planet!
pink panther 10-26-2008
reply profile send pm notify

Nice pics, those are great.
putzman1975 10-26-2008
reply profile send pm notify

how u wash out? good job

typesdubs 10-26-2008
reply profile send pm notify

Looks like you tryed one way first, boom was too wide for the opening? Then found a way to make it work.  Very nice job! I would never have thought you could do that with a boom. Just noticed the schwing truck mount in the pic too.
ShortStik 10-27-2008
reply profile send pm notify

thx for the comments.  it was a sqeeze.

how do i wash out? that day very fast.  had to bring the boom down to pump out into the mixer.  crew took their sweet as time and the mud was flashing.  they didnt even drain the hoses.  had to bar 40ft clean.  A$$ Holes

the schwing in the background was lineing colums,  hehehe,  i boom them.
Tigger 10-27-2008
reply profile send pm notify

Wow that is one hell of a setup!!! I run a schwing 24z n would like to get into positions like that.

ShortStik 10-27-2008
reply profile send pm notify

never knew schwing made a 24z.  got any pic?

is the boom setup like the 36sx?
Mr wibau 10-28-2008
reply profile send pm notify

hey mate sweet pxt. am not a great fan off over head rams. hey how do you go getting back to the cab while under a low roof.
Leroy 10-28-2008
reply profile send pm notify

  What? its a Schwing 24m
ShortStik 10-28-2008
reply profile send pm notify

operated a 26m that was a 4section.  when did schwing start makin mixer/pumps?

with the mack truck, if you can get the boom out of the cradle and to the front, the second section just misses the corners of the cab. 
ShortStik 10-28-2008
reply profile send pm notify

Mr wibau

misread your question, not sure what you mean by overhead ram?

and pullin back to the cab under a roof,  trial and error.  like bob says in his safty tips, remember what works. (lot of good info there bob, thx)  it hard to get closer then the length of the main section,  always cleaning slater cause the hose has to be pushed towards the truck and boom