I hope that y'all were paying attention to how he used his 3x3 pads. Their ability to remain flat is affected by how they are loaded. He correctly used the 2x2 pads on top of the 3x3. If your plastic pads look like the pocket of a ball glove when you are set-up; you do not have it figured out.

THAT - is the way to do it!!!

;~)

Thanks BOB!!!! since becoming more active on this site that is the way i do it every time DICA'S are unbelievable!!!!!

Hard to believe 70+ veiws and no one has started pickin it apart

hey Who i thought bb policy says you cant use the air cuff?

First i have heard of it,We keep gettin more of them put on trucks out here so it must not be

ok i was just wondering cuz i operate a 06 putz 52m and it has the cuff setup and i asked my boss and he says that policy says we cant use it. i guess sometimes the cuff doesnt release in time and they are having hose wipping accidents. but i have a switch on the outside of my computer box that makes it so the pump will wait like 5 seconds before the pump starts pumping so i dont see how it doesnt release in time.

With mine you have to "manually" release the cuff with a seperate remote it looks kinda like a garge door opener and then once it is released turn on the pump.It is on its own seperate setup,It is not tied into the pump at all

HEy, I noticed your wooden pad isn't perfectly lined up with your Dica pad.  It's that kind of careless set-up that will probably wear the pad out pre-maturely.

just kiddin' -- I wanted to be the first to pick your pics apart...

nice work, WHO??

Hey, I had an air-cuff in use on Monday...like OregonFan, mine runs through the pump computer so it's got the delay.  I don't know if I would like a separate activator for the cuff...I wouldn't know what to do if I was chewing gum...too many things going on at once...haha

Is it possible use the air cuff on Schwing 61m?

Yeah you can run it on a 61!

BOB,

PLEASE TELL ME HOW SOMEONE COULD IMPROPERLY USE THOSE TWO PADS TOGETHER ITS NOT BRAIN SURGERY. I DONT SEE HOW YOU COULD MAKE IT LOOK LIKE A BALL GLOVE ?

I am pretty sure he was talkin about just puttin the dica down with no 2x2 on top