Sorry new at this, I was wondering how to add more than one photo to the same post.

You can only do that if the photos are online already. thank you can use the insert image link for each photo you want to upload.

You can upload all your photos here for free and then link to them. All photos must be 500k or smaller.

http://www.concretepumping.com/photo/

Copy and paste them from your profile like this...

I like this one, it's nice to see some new iron out there. It's kinda rare these days?...

TT,

thanks man i appreciate it. yeah, kinda sucks everything went in the crapper after financing went through. Lifes a challenge though. Makes me rely on the Lord more! pump on.

it looks like our 37

nice 37m, is it a Junjin pump, if so thats why they look similar. Alliance partnered with them. they ship over the pump and alliance puts it on the chassis and wires 'em and paints 'em.

  Those are great pumps, I've ran a few 36s that were very similar (early Concords). Make sure that the turret gets plenty of grease and grease it while it's swinging. I've seen those grease manifolds allow more grease to one area and less to the others.

Hey mate flowcrete mount them over here. Yes lots and lots off grease when i was on it i did. I have b slew ring on mine now. More the grease there is the better it slews.

you say lots of grease!! could you give an example? My lots and your lots could be diferent.IE-1 tube16oz per day or per three days?thanks

well, once a week i stand the boom straight up and each zirk gets one full turn of the boom. I have 8 zirks in the front and it takes about 2 to 2 1/2 tubes. whatever that is. i also use a battery operated licoln grease gun, 14 volt.

hey rmk,  you have a beautifull pump, i"m sure your pump was at the booth of alliance at the WOC 3 week ago?

had taken a look at your pump...really nice iron.. congrat

your right zxazxa,

We drove it home from vegas, not the funnest road trip. thank you hopefully i can keep it busy.