Todd | 01-15-2008 | comment profile send pm notify |
So what is wrong with this picture. |
||
typesdubs | 01-15-2008 | reply profile send pm notify |
No it's not; no one's that dumb. We're all professionals remember. Any lateral loads on that outrigger/dunnage setup can make it all fall over real fast. |
||
Bob | 01-15-2008 | reply profile send pm notify |
The picture is of a crane (no pump operator is that dumb). He needed the layers to gain elevation to level his rig out; even if he went about it the wrong way. The only thing he did right was to use a pad under the dunnage so as not to 'dent' the roadway. This is a perfect example: Pump operators are at least as sharp as a crane operator. ;~) usually sharper ! |
||
bigaboy | 01-15-2008 | reply profile send pm notify |
ha, my wife spotted the discreppancy in two seconds. to bad she won't run a pump. |
||
Boozehound | 01-15-2008 | reply profile send pm notify |
what's not wrong with this setup. |
||
Bob | 01-16-2008 | reply profile send pm notify |
Here is a photo that I saw on the internet. When the guidelines on 'how much downforce can be supported by various soil types' were made there is a sentence that says; 'frozen ground shall not be assumed to have a higher value than the same ground in an unfrozen condition' ... this is why. |
||
Bob | 01-16-2008 | reply profile send pm notify |
As an operator, I always hated the snow covered ground. It was like Forrest Gump and his box of chocolates "Ya' never know what you're going to get." That being said; isn't it the smart move to be prepared for the worst case? How much due diligence do we, as operators, owe not only our co-workers, but our company? No reasonable & prudent individual would build an ark under the outrigger under those conditions; but perhaps four or five 4x6 x 4 ft pieces of dunnage, and then the 2x2 pad would have been a good idea. It all boils down to the same thing every time. How careful do you want to be? I have been there and done that... and chunked the 4x6 off the pump. It is a personal decision that everyone must make. I am sure that in the operators mind he thought that he was ok; no one sets up in what they consider to be a dangerous way. It is all in how you were taught. Another point for training the trainers. ;~) |
||
Bob | 01-16-2008 | reply profile send pm notify |
The best "Set-up" photo I have ever seen was on this site. It was a Reed Pump. I wish that I knew who that was; he had it going on. |
||
Todd | 01-16-2008 | reply profile send pm notify |
Here you go Bob sorry it took so long for me to find them. I made a folder in the hopper page with just dunnage stuff cool but here are the pics you were talking about. |
||
Bob | 01-16-2008 | reply profile send pm notify |
Thanks, Todd Those are not exactly the ones I remember (when I remember to remember), but that is pretty much a text book set-up. If you know who that operator is HE should get one of those hats you were talking about. Choice set-up!!! ;~) |
||
38zman | 01-17-2008 | reply profile send pm notify |
MMMmmm jenga anyone oh this guy must like to play it at work If this person continues to do set ups like this I hate to say but we will see him in the news and it wont be in a good way |