Concrete Pump Operator Training Checklist

Trainer: _________________________ Trainee: _________________________

Date Started: _______________ Completion Date: _______________

Pre-Training Qualification Verification

  • [ ] Valid driver's license checked
  • [ ] Previous experience documented
  • [ ] Medical clearance verified (if required)
  • [ ] PPE provided and proper use demonstrated

Safety Fundamentals

  • [ ] Reviewed safety as the primary job responsibility
  • [ ] Explained importance of being on time and prepared
  • [ ] Demonstrated proper PPE usage (hard hat, safety glasses, gloves, boots)
  • [ ] Reviewed company safety policies and emergency procedures
  • [ ] Explained exclusion zone requirements and enforcement

Equipment Familiarization

  • [ ] Identified specific pump model and key components
  • [ ] Reviewed operator's manual with trainee
  • [ ] Explained pump's functions, limitations, and specifications
  • [ ] Demonstrated all controls and their functions
  • [ ] Explained hydraulic systems and pressure indicators

Pre-Operation Procedures

  • [ ] Demonstrated completion of daily inspection checklist
  • [ ] Showed proper logbook documentation
  • [ ] Practiced pre-trip vehicle inspection procedure
  • [ ] Reviewed safe driving practices with outriggers stowed
  • [ ] Explained importance of securing all components before transit

Site Assessment & Setup

  • [ ] Demonstrated proper site assessment:
    • [ ] Overhead power lines identification
    • [ ] Ground conditions evaluation
    • [ ] Underground utility awareness
    • [ ] Traffic management considerations
    • [ ] Accessibility for concrete trucks
  • [ ] Practiced outrigger deployment procedure
  • [ ] Demonstrated proper cribbing techniques for different ground conditions:
    • [ ] Hard surface setup
    • [ ] Soft ground setup
    • [ ] Near trenches or excavations
  • [ ] Practiced leveling the pump
  • [ ] Verified proper load distribution on outriggers

Boom Operation

  • [ ] Demonstrated boom unfolding sequence
  • [ ] Practiced boom control and positioning
  • [ ] Explained boom clearance requirements